Synthetic Stucco Repair Methods

Stucco Repair Jacksonville

​Synthetic stucco is also known as the Exterior Insulation Finish Systems (EIFS), and it is more appealing because it is weather resistant. However, prompt and adequate synthetic stucco repair is crucial to protect it against water damage. Water damaged stucco will undoubtedly affect the aesthetics of your home or property. 

Leaving water on your stucco is not a good idea – stucco is not waterproof; it will get damaged. The structural support of the stucco will be affected, and the underlying wood rotten. As a result, you should act fast when you notice water sitting on your stucco to avoid massive damage.
​
Although there is no permanent synthetic stucco solution, there are ways to remedy the water damaged stucco. Follow the steps below to repair your stucco:

Step By Step Stucco Fix

Step 1: Find and Assess the Damage
Search and locate the cause of the water damage and assess the extent of the damage, which will determine the repair method to use. Synthetic damage is usually caused by water and termites. Knowing the real cause of the damage will allow the repair to be permanent. Waterproofing is important!
 
Step 2: Determine the Right Solution to the Cause of the Problem
Finding the right solution to the problem's cause is the right way to fix the stucco problem permanently. If the stucco damage were caused by water, it would be appropriate to install suitable flashing, such as rake flashing, valley flashing, and diverter flashing, in addition to the roof joint. Meanwhile, if the synthetic stucco got damaged by termites, hire an experienced terminator to get rid of the termites right to their source.
 
Step 3: Caulk
Apply caulk to all seems around the windows' and doors' moldings, including the soil joint and window jamb. Get the caulking adequately done for the best result. It will look beautiful after painting.
 ​
Step 4: Install Flashing
If the damaged area or around the windows, install the right flashing around the window sill. Each type of window has the suitable the right kind of flashing to install. If water seeps in from the chimney, you should install cricket flashing at the chimney base to prevent further water seepage. This will hinder wood rot as well!
 
Step 5: Fix Cracks
Patch the damaged parts especially cracked portions, with caulk. Use adequate caulk to fill the cracks correctly. Do not leave any holes or cracks open; it can be the access point for termites to get in and damage the synthetic stucco.

Get Your Stucco Repaired

​Small damages can be caulked or patching with elastomeric compounds, but large or significant damages could require mortar replacement and flashing. Immediately you spot signs of damage on your synthetic stucco, contact us directly for a professional solution. We assure you of the best experience possible.